Nginx在线服务状态下平滑升级或新增模块的详细操作记录 | 张戈博客

  • 时间:
  • 浏览:1
  • 来源:资源屋 - 专注共享我爱生活网技术

今天,产品那边发来需求,说有个APP的IOS版本下载包还要新增https协议,在景安购买了免费的SSL证书。当我往nginx上新增ssl时,发现服务器上的nginx简直没编译SSL模块!

都看下旧版本nginx的configure选项:

linux-gz215:# /usr/local/sbin/nginx -V
nginx version: nginx/1.0.11
built by gcc 4.1.2 8070115 (prerelease) (SUSE Linux)
configure arguments: --prefix=/usr/local/nginx

或者是出于最小化安装的考虑,就只一个多prefix参数,而版本也挺低的,干脆就升级一下好了!或者服务器位于在线服务情況,为了处理升级带来的不良影响,我决定给nginx来个平滑升级,结果发现还简直如丝般顺滑。。。

下面记录一下平滑升级和新增模块的过程。

一、半自动平滑升级

所谓半自动,随便说说之前 在最后迁移的那我使用源码自带的升级命令:make upgrade来自动完成。

①、按需编译新版本的nginx

根据需求,常规编译新版本nginx,不过或者执行到make就打住,暂且make install!

#下载1.5.7版本,并解压
cd /usr/local/src
wget http://nginx.org/download/nginx-1.6.0.tar.gz
tar zxvf nginx-1.6.0.tar.gz
cd nginx-1.6.0

#根据实际还要新增的模块,先准备所需文件(随便说说只还要解压即可,完整篇

安装,上方编译就都可不可否不指定路径了):
#1. 安装pcre:
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.34.tar.gz 
tar -zxvf pcre-8.34.tar.gz
cd pcre-8.34
./configure && make && make install

#2. 安装zlib:
cd /usr/local/src
wget http://zlib.net/zlib-1.2.8.tar.gz
tar -zxvf zlib-1.2.8.tar.gz
cd zlib-1.2.8
./configure && make && make install

#3. 安装openssl:
cd /usr/local/src
wget http://www.openssl.org/source/openssl-1.0.1c.tar.gz
tar -zxvf openssl-1.0.1c.tar.gz
cd openssl-1.0.1c
./configure && make && make install

#添加所需参数结束了了了了编译:
./configure --user=www --group=www \
--prefix=/usr/local/nginx \
--with-http_ssl_module \
--with-openssl=/usr/local/src/openssl-1.0.1c \ #对应openssl源码解压后的路径,下同(pcre,zlib)
--with-http_stub_status_module \
--with-pcre \
--with-pcre=/usr/local/src/pcre-8.21 \
--with-zlib=/usr/local/src/zlib-1.2.8

#执行make编译,或者暂且执行make install

make

②、重命名nginx旧版本二进制文件,即sbin目录下的nginx(期间nginx暂且会停止服务!):

linux-gz215:/usr/local/src/nginx-1.6.0 # mv /usr/local/nginx/sbin/nginx /usr/local/nginx/sbin/nginx.old

③、或者拷贝一份新编译的二进制文件:

linux-gz215:/usr/local/src/nginx-1.6.0 # cp objs/nginx /usr/local/nginx/sbin/

④、在源码目录执行make upgrade结束了了了了升级:

linux-gz215:/usr/local/src/nginx-1.6.0 # make upgrade

#下面是make upgrade命令的打印信息:
/usr/local/nginx/sbin/nginx -t
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
kill -USR2 `cat /usr/local/nginx/logs/nginx.pid`
sleep 1
test -f /usr/local/nginx/logs/nginx.pid.oldbin
kill -QUIT `cat /usr/local/nginx/logs/nginx.pid.oldbin`

#最后确认一下nginx应用应用程序,都可不可否发现一个多主应用应用程序,或者有正在关闭的应用应用程序(shutting down):
linux-gz215:/usr/local/src/nginx-1.6.0 # ps aux | grep nginx
root 969 0.0 0.3 8280 1844 ? Ss Dec09 0:01 nginx: master process /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
www 4196 0.1 2.5 19112 12872 ? S 14:52 0:00 nginx: worker process is shutting down
www 4280 0.1 2.5 19112 12872 ? S 14:52 0:00 nginx: worker process is shutting down
www 4257 0.1 2.5 19112 12872 ? S 14:52 0:00 nginx: worker process is shutting down
root 4663 0.0 0.3 5488 1900 ? S 14:58 0:00 nginx: master process /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf

#过一段时间后,再次确认nginx应用应用程序,都可不可否发现老应用应用程序已自动退出了(位于一段时间是或者旧应用应用程序还有未结束了了了的服务)
root 969 0.0 0.3 8280 1844 ? Ss Dec09 0:01 nginx: master process /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
www       4665  0.1  2.4  16808 12444 ?        S    14:58   0:01 nginx: worker process

完成后,最后确认一下 nginx -V :

linux-gz215:~ # /usr/local/nginx/sbin/nginx -V
nginx version: nginx/1.6.0
built by gcc 4.1.2 8070115 (prerelease) (SUSE Linux)
TLS SNI support enabled
configure arguments: --user=www --group=www --prefix=/usr/local/nginx --with-http_ssl_module --with-openssl=/usr/local/src/openssl-1.0.1c --with-http_stub_status_module --with-pcre --with-pcre=/usr/local/src/pcre-8.21 --with-zlib=/usr/local/src/zlib-1.2.8

正常了,平滑升级成功!

二、纯手动平滑升级

纯手动模式,指的是在最后做迁移的那我,完整篇 使用手动命令来搞懂,处理编译或者位于不一致的参数啥的。

实际上,在make那我,一群人儿儿都可不可否查看nginx源码目录下的Makefile内容如下:

default:        build

clean:
        rm -rf Makefile objs

build:
        $(MAKE) -f objs/Makefile
        $(MAKE) -f objs/Makefile manpage

install:
        $(MAKE) -f objs/Makefile install

upgrade:
        /usr/local/nginx/sbin/nginx -t

        kill -USR2 `cat /usr/local/nginx/logs/nginx.pid`
        sleep 1
        test -f /usr/local/nginx/logs/nginx.pid.oldbin

        kill -QUIT `cat /usr/local/nginx/logs/nginx.pid.oldbin`

之前 ,说白了纯手动之前 执行upgrade标签下的命令行而已,实际上或者确认Makefile下的命令路径都有正确的,用命令自动迁移是没有任何现象图片的。

总是一群人会不放心的,喜欢手动一步一步的搞懂,我也来分派下纯手动步骤:

①~③和半自动一样,按常规步骤先编译nginx,不过只执行到make就打住,或者将旧的sbin下的nginx文件移走,再将编译得到的objs目录下的nginx文件放在那我的sbin目录。

④、测试新版本的nginx否有正常:

[[email protected]_Server nginx-1.6.0]# /usr/local/nginx/sbin/nginx -t
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok #OK,没有现象图片!
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful

⑤、给旧nginx发送平滑迁移信号(若不清楚pid路径就用可用命令(2)):

#可用命令(1):
kill -USR2 `cat /usr/local/nginx/logs/nginx.pid`

#可用命令(2):
kill -USR2 `ps aux | grep "nginx: master process" | grep -v grep | awk '{print $2}'`

Ps:上方随便说说之前 旧nginx的pid,之前 先用ps aux找到正在运行的nginx主应用应用程序pid,再执行 kill -USR2 PID值亦可。

⑥、等待的图片 旧版本Nginx的pid变为oldbin(执行如下命令查看否有生成)

test -f /usr/local/nginx/logs/nginx.pid.oldbin && echo OK!

⑦、  从容关闭旧版本的Nginx应用应用程序

kill –WINCH `cat /usr/local/nginx/log/nginx.oldbin`

此时,旧的工作应用应用程序就总要慢慢随着任务执行完毕而退出,新版的Nginx的工作应用应用程序会逐渐取代旧版工作应用应用程序。

⑧、此时,不重载配置启动旧工作应用应用程序(被委托人感觉是为了将任务完整篇 切换到新的nginx上)

kill –HUP `cat /url/local/nginx/log/nginx.oldbin`

⑨、结束了了了工作应用应用程序,完成此次升级操作:

kill –QUIT `cat /usr/local/nginx/log/nginx.oldbin`

⑩、最后,验证nginx否有升级成功:

linux-gz215:~ # /usr/local/nginx/sbin/nginx -V
nginx version: nginx/1.6.0 #没现象图片
built by gcc 4.1.2 8070115 (prerelease) (SUSE Linux)
TLS SNI support enabled
configure arguments: --user=www --group=www --prefix=/usr/local/nginx --with-http_ssl_module --with-openssl=/usr/local/src/openssl-1.0.1c --with-http_stub_status_module --with-pcre --with-pcre=/usr/local/src/pcre-8.21 --with-zlib=/usr/local/src/zlib-1.2.8

特意测试了下纯手动的做法,下面是我的操作记录,仅供参考:

linux-gz215:/usr/local/nginx # cd sbin/
linux-gz215:/usr/local/nginx/sbin # ll
总计 6828
-rwxr-xr-x 1 root root 6975582 2014-12-23 16:44 nginx
linux-gz215:/usr/local/nginx/sbin # mv nginx nginx.old
linux-gz215:/usr/local/nginx/sbin # 
linux-gz215:/usr/local/nginx/sbin # cp /usr/local/src/nginx-1.5.7/objs/
autoconf.err        nginx               ngx_auto_config.h   ngx_modules.c       src/              
Makefile            nginx.8             ngx_auto_headers.h  ngx_modules.o       
linux-gz215:/usr/local/nginx/sbin # cp /usr/local/src/nginx-1.5.7/objs/nginx .
linux-gz215:/usr/local/nginx/sbin # ll
总计 13656
-rwxr-xr-x 1 root root 6975582 2014-12-23 16:57 nginx
-rwxr-xr-x 1 root root 6975582 2014-12-23 16:44 nginx.old
linux-gz215:/usr/local/nginx/sbin # /usr/local/nginx/sbin/nginx -t -c /usr/local/nginx/conf/nginx.conf
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
linux-gz215:/usr/local/nginx/sbin # ps aux | grep nginx 
root     18152  0.0  0.0   9264  2588 ?        S    16:45   0:00 nginx: master process ./nginx
nobody   18331  1.0  0.0  13380  5488 ?        S    16:52   0:04 nginx: worker process
nobody   18332  1.2  0.0  13380  5488 ?        S    16:52   0:05 nginx: worker process
nobody   18333  0.6  0.0  13380  5488 ?        S    16:52   0:02 nginx: worker process
nobody   18334  0.8  0.0  13380  5488 ?        S    16:52   0:03 nginx: worker process
nobody   18335  0.4  0.0  13380  5488 ?        S    16:52   0:01 nginx: worker process
nobody   18336  0.1  0.0  13380  5488 ?        S    16:52   0:00 nginx: worker process
nobody   18337  0.3  0.0  13828  5844 ?        S    16:52   0:01 nginx: worker process
nobody   18338  0.2  0.0  13380  5488 ?        S    16:52   0:01 nginx: worker process
root     18473  0.0  0.0   4952   796 pts/1    S+   16:58   0:00 grep nginx
linux-gz215:/usr/local/nginx/sbin # kill -USR2 18152
linux-gz215:/usr/local/nginx/sbin # ps aux | grep nginx
root     18152  0.0  0.0   9264  2588 ?        S    16:45   0:00 nginx: master process ./nginx
nobody   18331  0.9  0.0  13380  5488 ?        S    16:52   0:04 nginx: worker process
nobody   18332  1.2  0.0  13380  5488 ?        S    16:52   0:05 nginx: worker process
nobody   18333  0.5  0.0  13380  5488 ?        S    16:52   0:02 nginx: worker process
nobody   18334  0.8  0.0  13380  5488 ?        S    16:52   0:03 nginx: worker process
nobody   18335  0.4  0.0  13380  5488 ?        S    16:52   0:01 nginx: worker process
nobody   18336  0.2  0.0  13792  5840 ?        S    16:52   0:01 nginx: worker process
nobody   18337  0.5  0.0  13464  5804 ?        S    16:52   0:02 nginx: worker process
nobody   18338  0.2  0.0  13380  5488 ?        S    16:52   0:01 nginx: worker process
root     18474  0.0  0.0   9124  2480 ?        S    16:59   0:00 nginx: master process ./nginx
nobody   18475  5.0  0.0  13364  5424 ?        S    16:59   0:00 nginx: worker process
nobody   18476  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18477  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18478  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18479  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18480  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18481  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18482  0.0  0.0  13136  8032 ?        S    16:59   0:00 nginx: worker process
root     18484  0.0  0.0   4980   812 pts/1    S+   16:59   0:00 grep nginx
linux-gz215:/usr/local/nginx/sbin # kill -WINCH 18152
linux-gz215:/usr/local/nginx/sbin # ps aux | grep nginx
root     18152  0.0  0.0   9264  2588 ?        S    16:45   0:00 nginx: master process ./nginx
nobody   18334  0.7  0.0  13380  5488 ?        S    16:52   0:03 nginx: worker process is shutting down
nobody   18337  0.5  0.0  13380  5488 ?        S    16:52   0:02 nginx: worker process is shutting down
root     18474  0.0  0.0   9124  2480 ?        S    16:59   0:00 nginx: master process ./nginx
nobody   18475  2.3  0.0  13672  5724 ?        S    16:59   0:01 nginx: worker process
nobody   18476  0.0  0.0  13136  5240 ?        S    16:59   0:00 nginx: worker process
nobody   18477  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18478  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18479  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18480  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18481  0.0  0.0  13136  5240 ?        S    16:59   0:00 nginx: worker process
nobody   18482  0.0  0.0  13136  5240 ?        S    16:59   0:00 nginx: worker process
root     18486  0.0  0.0   4956   796 pts/1    S+   16:59   0:00 grep nginx
linux-gz215:/usr/local/nginx/sbin # ps aux | grep nginx
root     18152  0.0  0.0   9264  2588 ?        S    16:45   0:00 nginx: master process ./nginx
root     18474  0.0  0.0   9124  2480 ?        S    16:59   0:00 nginx: master process ./nginx
nobody   18475  2.8  0.0  13792  5908 ?        S    16:59   0:01 nginx: worker process
nobody   18476  0.0  0.0  13136  5240 ?        S    16:59   0:00 nginx: worker process
nobody   18477  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18478  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18479  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18480  0.0  0.0  13136  8040 ?        S    16:59   0:00 nginx: worker process
nobody   18481  0.0  0.0  13136  5240 ?        S    16:59   0:00 nginx: worker process
nobody   18482  0.0  0.0  13136  5240 ?        S    16:59   0:00 nginx: worker process
root     18488  0.0  0.0   4956   796 pts/1    S+   16:59   0:00 grep nginx
linux-gz215:/usr/local/nginx/sbin # kill -HUP 18152
linux-gz215:/usr/local/nginx/sbin # ps aux | grep nginx
root     18152  0.0  0.0   9264  2588 ?        S    16:45   0:00 nginx: master process ./nginx
root     18474  0.0  0.0   9124  2480 ?        S    16:59   0:00 nginx: master process ./nginx
nobody   18475  3.1  0.0  13256  5376 ?        S    16:59   0:02 nginx: worker process
nobody   18476  0.0  0.0  13256  5336 ?        S    16:59   0:00 nginx: worker process
nobody   18477  0.8  0.0  13420  5532 ?        S    16:59   0:00 nginx: worker process
nobody   18478  0.2  0.0  13256  5376 ?        S    16:59   0:00 nginx: worker process
nobody   18479  0.2  0.0  13580  5656 ?        S    16:59   0:00 nginx: worker process
nobody   18480  0.0  0.0  13256  5376 ?        S    16:59   0:00 nginx: worker process
nobody   18481  0.3  0.0  13412  5532 ?        S    16:59   0:00 nginx: worker process
nobody   18482  0.0  0.0  13256  5320 ?        S    16:59   0:00 nginx: worker process
nobody   18570  2.0  0.0  13276  5380 ?        S    17:00   0:00 nginx: worker process
nobody   18571  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18572  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18573  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18574  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18575  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18576  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18577  0.0  0.0  13276  5164 ?        S    17:00   0:00 nginx: worker process
root     18579  0.0  0.0   4980   812 pts/1    S+   17:00   0:00 grep nginx
linux-gz215:/usr/local/nginx/sbin # kill -QUIT 18152
linux-gz215:/usr/local/nginx/sbin # ps aux | grep nginx
root     18474  0.0  0.0   9124  2480 ?        S    16:59   0:00 nginx: master process ./nginx
nobody   18475  2.2  0.0  13256  5376 ?        S    16:59   0:02 nginx: worker process
nobody   18476  0.0  0.0  13280  580 ?        S    16:59   0:00 nginx: worker process
nobody   18477  1.5  0.0  13256  5376 ?        S    16:59   0:01 nginx: worker process
nobody   18478  0.1  0.0  13256  5376 ?        S    16:59   0:00 nginx: worker process
nobody   18479  0.2  0.0  13256  5376 ?        S    16:59   0:00 nginx: worker process
nobody   18480  0.0  0.0  13256  5376 ?        S    16:59   0:00 nginx: worker process
nobody   18481  0.2  0.0  13256  5376 ?        S    16:59   0:00 nginx: worker process
nobody   18482  0.0  0.0  13256  5320 ?        S    16:59   0:00 nginx: worker process
nobody   18570  3.2  0.0  13644  5672 ?        S    17:00   0:00 nginx: worker process
nobody   18571  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18572  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18573  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18574  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18575  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18576  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18577  0.6  0.0  13380  5412 ?        S    17:00   0:00 nginx: worker process
root     18582  0.0  0.0   4956   804 pts/1    R+   17:00   0:00 grep nginx
linux-gz215:/usr/local/nginx/sbin # ps aux | grep nginx
root     18474  0.0  0.0   9124  2480 ?        S    16:59   0:00 nginx: master process ./nginx
nobody   18475  2.2  0.0  13256  5376 ?        S    16:59   0:02 nginx: worker process
nobody   18476  0.2  0.0  13452  5520 ?        S    16:59   0:00 nginx: worker process
nobody   18477  1.5  0.0  13256  5376 ?        S    16:59   0:01 nginx: worker process
nobody   18478  0.1  0.0  13256  5376 ?        S    16:59   0:00 nginx: worker process
nobody   18479  0.2  0.0  13256  5376 ?        S    16:59   0:00 nginx: worker process
nobody   18480  0.0  0.0  13256  5376 ?        S    16:59   0:00 nginx: worker process
nobody   18481  0.2  0.0  13256  5376 ?        S    16:59   0:00 nginx: worker process
nobody   18482  0.0  0.0  13256  5320 ?        S    16:59   0:00 nginx: worker process
nobody   18570  3.2  0.0  13644  5672 ?        S    17:00   0:01 nginx: worker process
nobody   18571  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18572  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18573  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18574  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18575  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18576  0.0  0.0  13276  5172 ?        S    17:00   0:00 nginx: worker process
nobody   18577  0.5  0.0  13380  5412 ?        S    17:00   0:00 nginx: worker process
root     18584  0.0  0.0   4956   812 pts/1    S+   17:00   0:00 grep nginx
linux-gz215:/usr/local/nginx/sbin #

为了验证平滑升级随便说说不影响在线业务,我特意在升级的那我,利用ab命令总是在发送请求:

ab -n800000 -c10 http://domain.com/

直到升级完成,使用ctrl +C 终止并查看ab结果,都可不可否发现几十万次的请求完整篇 成功,没有失败!证明平滑升级的可行性!可惜忘记了截图,感兴趣的童鞋都可不可否自行测试下!

好了,关于nginx的平滑升级和在线新增模块的操作记录就到这里结束了了了了,希望对你有所帮助。